NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
To configure wireless Point to Multi-point Bridging:
1. Open a web browser and log in to the WN802T v2 using the addressing scheme you have set
up.
.
Figure 5-1 Enable wireless bridging and repeating
2. Under the Configuration tab on the main menu, click Wireless Bridge. The Bridging and
Repeating screen displays showing the default settings for the wireless access point
1).
3. Check the Enable Wireless Bridging and Repeating checkbox to enable multi-point
bridging. Wireless Point to Multi-Point Bridge is the default mode.
4. Down the left of the screen select the profile you want to add/edit and click Edit.
5. The Edit Security Profile screen displays (see
6. Enter a profile name or leave the default.
5-2
Figure
5-2).
v1.0, September 2008
(Figure 5-
Advanced Wireless Bridging