Viewing General Summary Information - NETGEAR WN802T Reference Manual

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
• If the wireless access point is rebooted, the table data is lost until the wireless access point
rediscovers the devices.
Note: A wireless network can include multiple wireless access points, all using the
same network name (SSID). This extends the reach of the wireless network
and lets users roam from one access point to another which provides seamless
network connectivity. Under these circumstances, be aware that only the
stations associated with this wireless access point will be presented in the
Available Wireless Station List.

Viewing General Summary Information

The System screen, under the Monitoring tab provides a summary of the current WN802T v2
configuration settings, including current IP and wireless settings. This information is read only, so
any changes must be made on other screens.
To access the System screen:
Under the Monitoring tab, select System on the main menu to view the System screen, shown in
Figure 4-7. This screen shows the current values of parameters described in
Table 4-1. System Information fields
Field
Access Point Information
Access Point Name
MAC Address
Country/Region
Firmware Version
Current Time
4-8
Description
The default name may be changed, if desired.
Displays the Media Access Control (MAC) address of the wireless access
point's Ethernet port.
Displays the domain or region for which the wireless access point is
licensed for use. It may not be legal to operate this wireless access point in
a region other than one of those identified in this field.
The version of the firmware currently installed.
The current date and time in the time zone.
v1.0, September 2008
Table 4-1:
Management