Permanent Hold - Bosch TSTBM-RRS--TW-A Installation Manual

new features On TsTbM3h2Cph6W-a
neW feaTures On The
TsTbM3h2Cph6W-a afTer
TsTbM-rrs--TW-a is COnneCTeD
next Zone key
NEXT ZONE
In this example, the name of the zone currently
having priority is sysTeM aVerage.
System average is the average of all connected
sensors.
Local is the ambient temperature of the
TSTBM3H2CPH6W-A.
The name of the TSTBM-RRS--TW-A can be
displayed. This shows it has priority.
neXT ZOne key cycles through ambient
temperatures for connected zones.
Thermostat hold (permanent)
hOlD
hOlD: Indicates the TSTBM3H2CPH6W-A is in
permanent hOlD. A permanent HOLD can be active
for system average, local, or any TSTBM-RRS--TW-A.
run sCheDule: Will cancel any holds and return
the system to the program.
To put the thermostat into hold select system average
or the zone you want to hold. Then use the arrows to
adjust the setpoint. Then press the hOlD key.
Revised 02-13
SYSTEM
AVERAGE
perManenT
hOlD
Caution
run sCheDule
Subject to change without prior notice
TsTbM-rrs--TW-a
setpoint not Displayed
Setpoint will only be displayed for the zone currently
being used by the program or in hold. Press the
or to show the setpoint for adjustment.
TeMpOrary hOlD (4 hOurs)
reMOTe sensOr
reMOTe: Indicates the TSTBM3H2CPH6W-A is in
temporary hold. The setpoint will now display the
temporary override setpoint.
The name of the remote sensor will be displayed. In
this example, it is reMOTe 2.
run schedule: Will cancel any holds and return the
system to the program.
If the batteries in the TSTBM-OTS--TW-A
outdoor temperature sensor are low, the
TSTBM3H2CPH6W-A thermostat will display
a fl ashing "bA" and underneath will display
"Low bat Outdoor".
6 720 220 377
nO Display
reMOTe
run sCheDule
10
+