NETGEAR ProSafe FVS124G Reference Manual page 84

Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
Inbound Rule Example: Allowing Videoconference from Restricted Addresses
If you want to allow incoming videoconferencing to be initiated from a restricted range of outside
IP addresses, such as from a branch office, you can create an inbound rule. In the example shown
in Figure 6-4, CU-SeeMe connections are allowed only from a specified range of external IP
addresses.
Figure 6-4: Rule example: videoconference from restricted addresses
Inbound Rule Example: One-to-One NAT Mapping
This application note describes how to configure multi-NAT to support multiple public IP
addresses on one WAN interface of a NETGEAR FVS124G ProSafe VPN Firewall 25 with 4
Gigabit LAN and Dual WAN Ports. By creating an inbound rule, we will configure the firewall to
host an additional public IP addresses and associate this address with a web server on the LAN.
This procedure was developed and tested using:
• Netgear FVS124G VPN Firewall with version 1.0 firmware
– WAN1 IP address is 10.1.0.118
6-8 Firewall Protection and Content Filtering
202-10085-01, March 2005