Load Balancing (And Protocol Binding) Setup - NETGEAR ProSafe FVS124G Reference Manual

Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
• Test Period—DNS query is sent periodically after every test period. The minimum test
period is 30 seconds.
• Maximum Failures—The WAN interface is considered down after the configured number
of DNS queries have failed to elicit a DNS reply from the configured DNS server. The
minimum number of failed DNS queries is four. The rollover link is brought up after this.
The minimum time to roll over after the primary WAN interface fails is two minutes (i.e., 30
second minimum test period times a minimum of four tests).
Once a rollover occurs, an alert will be generated (see
2.
Logs and Alerts" on page
then force traffic back on the original primary WAN interface by reapplying the WAN Mode
menu shown in Figure

Load Balancing (and Protocol Binding) Setup

Perform the following steps to configure the dual WAN ports for load balancing and protocol
binding on outbound traffic:
Select Load Balancing on the screen shown in
1.
Balancing screen shown in
Connecting the FVS124G to the Internet
6-30). You should then get the failed WAN interface restored and
4-6.
Figure 4-7.
202-10085-01, March 2005
"Getting E-Mail Notifications of Event
Figure 4-6 to invoke the WAN Mode Load
4-17