NETGEAR ProSafe FVS124G Reference Manual page 85

Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
– LAN IP address subnet is 192.168.1.1 255.255.255.0
• Web server PC on the firewall's LAN
– LAN IP address is 192.168.1.2
– Access to Web server is (simulated) public IP address 10.1.0.52
IP Address Requirements—If you arrange with your ISP to have more than one public IP address
for your use, you can use the additional public IP addresses to map to servers on your LAN. One of
these public IP addresses will be used as the primary IP address of the router. This address will be
used to provide Internet access to your LAN PCs through NAT. The other addresses are available
to map to your servers.
To configure the FVS124G for additional IP addresses:
Go to the Rules menu.
1.
If your server is to be on your LAN, select "LAN-WAN".
2.
Click the Add button to create an Inbound Services rule.
3.
In the Add/Edit menu (see
4.
Figure 6-5: Rule example: one-to-one NAT mapping
Firewall Protection and Content Filtering
Figure 6-5), select the HTTP service for a web server.
202-10085-01, March 2005
6-9