Using A Schedule To Block Or Allow Specific Traffic - NETGEAR ProSafe FVS124G Reference Manual

Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
Table 6-3. Groups and hosts
Item Description
Known PCs and This table lists all current entries in the Network Database. For each PC or device,
Devices the following data is displayed.
• Radio button—Use this to select a PC for editing or deletion.
• Name—The name of the PC or device. Sometimes, this can not be determined,
• IP Address—The current IP address. For DHCP clients, where the IP address is
• MAC Address—The MAC address of the PC. The MAC address is a low-level
• Group—Each PC or device must be in a single group. The Group column indicates
Operations • Group Assignment —You can select a group for any entry by selecting the desired
• Adding a new Entry—If a PC is not connected, using a fixed IP, or a different LAN
• Editing an Entry—You can edit an entry by selecting its radio button, and clicking
• Deleting an Entry—If a PC or device has been removed from your network, you can
• Edit Group Names—The Group names can be edited by clicking Edit Group

Using a Schedule to Block or Allow Specific Traffic

If you enabled content filtering in the Block Sites menu, or if you defined an outbound rule to use
a schedule, you can set up a schedule for when blocking occurs or when access is restricted. The
firewall allows you to specify when blocking will be enforced by configuring the Schedule tab
shown below:
6-22
and will be listed as Unknown. In this case, you can edit the entry to add a
meaningful name.
allocated by the DHCP Server in this device, this IP address will not change. Where
the IP address is set on the PC (as a fixed IP address), you may need to update
this entry manually if the IP address on the PC is changed.
network identifier which is fixed at manufacture.
which group each entry is in. By default, all entries are in the Default group (the D
column.)
group from the drop down menu in the Group column. Click Apply
segment, it may not be listed. In this case, you can add it by clicking the Add
button.
the Edit button.
delete it from the database by selecting its radio button, and clicking the Delete
button.
Names button. By default the group names are Default, Marketing, Sales,
Warehouse, Support, Lab1, Lab2, and Others.
202-10085-01, March 2005
Firewall Protection and Content Filtering