Inbound Rules (Port Forwarding) - NETGEAR ProSafe FVS124G Reference Manual

Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
• Quality of service (QoS) priorities—Each service at its own native priority that impacts its
quality of performance and tolerance for jitter or delays. You can change this QoS priority if
desired to change the traffic mix through the system.

Inbound Rules (Port Forwarding)

Because the FVS124G uses Network Address Translation (NAT), your network presents only one
IP address to the Internet and outside users cannot directly address any of your local computers.
However, by defining an inbound rule you can make a local server (for example, a web server or
game server) visible and available to the Internet. The rule tells the firewall to direct inbound
traffic for a particular service to one local server based on the destination port number. This is also
known as port forwarding.
Figure 6-2: Add Inbound Service Rules screen
Note: See "Port Triggering" on page 6-28
inbound traffic that would otherwise be blocked by the firewall.
Firewall Protection and Content Filtering
for yet another way to allow certain types of
202-10085-01, March 2005
6-5