Weller WX1 Operating Instructions Manual page 35

Parameter menu
Password (lock function)
Touchtones on/off
LCD contrast
LCD background brightness
After switching the lock function on, only the fixed temperature keys
can be operated on the soldering station. All other settings are disab-
led until the repair station is unlocked again.
Note
If you want only one temperature value to be selectable, the control
keys fixed temperature keys) must be set to the same temperature
value.
Lock the soldering station:
Set the required three-character locking code (between 001-999)
with the turn-and-click wheel.
The lock is active (the display shows a lock symbol).
Unlocking the soldering station
1. Call up the parameter menu. If the lock function is active, the
password menu item opens automatically. Three stars (***) are
shown on the display.
2. Set the three-character locking code using the turn-and-click
wheel.
3. Confirm the code with the Enter key.
Option Description
ON ON
OFF OFF
Option Description
10 LCD contrast: Low
60 LCD contrast: High
Option Description
10% LCD background brightness: Dark
100 % LCD background brightness: Light
Open Menu Station parameters 1
Open Menu Station parameters 1
Open Menu Station parameters 2
Open Menu Station parameters 2
33