CHAPTER 5. REMOVING THE
STANDARD DRAWER
unit (For KA,KB version)
1. REMOVING THE STANDARD DRAWER
UNIT
1) Open the printer cover
.
2) Remove the screw
fixed on the drawe unit.
1
3) Stand the main drawer sideways as illusted above, and re-
move the drawer connector from the MAIN PWB (CN:5
2. REPLACING THE STANDARD DRAWER
UNIT
Install the standard drawer unit in the reverse order of removing
The drawer top has the following holes with which the drawer position
can be changed.
A
: Standard position
: Rear position
).