Chapter 4. Removing The Printer Unit - Sharp UP-600 Installation Manual

5) With a flat-bladed screwdriver, remove the two latches of each
of the LCD rear cabinet
A
Turn of A and B when you remove it.
back gh
2. REPLACING THE LCD UNIT
Install the LCD unit in the reverse order of removing.
and the LCD filer .
CHAPTER 4. REMOVING THE
PRINTER UNIT
1. REMOVING THE PRINTER UNIT
1) Remove the top cabinet.
2) Remove the two screws
3) Remove the screw fixed on the earth wire
4) Remove the printer cable
1
2. REPLACING THE PRINTER UNIT
Install the printer unit in the reverse order of removing
fixed on the printer unit.
.
from the MAIN PWB (CN9).
1