Disassembly Of Power P.c.b; Disassembly Of Smps P.c.b - Panasonic SA-BT235P Service Manual

Caution: During assembling, ensure that heatsink spacer
is seated properly onto Amp Heatsink.
Caution: Ensure that D-Amp P.C.B. is properly located and
fixed on to Amp Heatsink before screwing.
Step 5 Fix 3 screws.
Caution: During assembling, ensure that screwing
sequence is strictly follow to the illustration shown.
Note: For assembling of others Digital Amplifier IC (IC5200),
repeat the (Step 1) to (Step 5) of 10.19.2.

10.19. Disassembly of Power P.C.B.

• Refer to "Disassembly of Top Cabinet".
Step 1 Release 2 catches.
Step 2 Remove Power P.C.B. in the direction of arrow.
Caution: During assembling, ensure that Power P.C.B. is
properly inserted & fully connected to SMPS P.C.B..

10.20. Disassembly of SMPS P.C.B.

• Refer to "Disassembly of Power P.C.B.".
Step 1 Release the 2 tabs at each side of the Front Panel in the
direction of arrow.
Step 2 Release the 3 tabs at the Bottom Chassis.
67