Panasonic SA-BT235P Service Manual page 34

7.4.5. Service Mode Table 5
Mode name
CEC (H) output Check of the CEC terminal high output of
HDMI.
CEC (L) output Check of the CEC terminal low output of
HDMI.
Tray OPEN/CLOSE Test The DVD drive tray is opened and closed
repeatedly.
Delete the Laser Used Laser used time stored in the memory of the
Time unit is deleted.
Delete the Last Drive Delete the Last Drive Error information stored
Error on the DVD Drive.
Delete the Error History Delete Error History information stored on the
unit.
Error code initialization Initialization of the last error code held by
timer (Write in F00)
Initialize Service Last Drive Error, Error history and Error
Codes stored on the unit are initialized to fac-
tory setting.
Finishing service mode Release Service Mode.
Item
Description
FL display
CECHOK
CECHNG
CECLOK
CECLNG
* is number of open/close cycle
times.
CLR
CLR
CLR
CLR
CLR
Display in STOP (SS) mode.
34
Key operation
(Remote controller key)
Press [5] [5] in service mode.
Press [5] [6] in service mode.
Press [9] [1] in service mode
*When releasing this mode, press
the [POWER] button of Remote
Controller more than 10 seconds.
Press [9] [5] in service mode.
Press [9] [6] in service mode.
Press [9] [7] in service mode.
Press [9] [8] in service mode.
Press [9] [9] in service mode.
Press power button on the front
panel or Remote controller in ser-
vice mode.