Step 4 Desolder 3P Cable at the cable holder (H6003) on
Operation Button P.C.B..
Step 5 Remove the Operation Button P.C.B..
12.8. Disassembly of Power Button
P.C.B.
• Refer to "Disassembly of Top Cabinet".
• Refer to "Replacement of Tray Ornament".
• Refer to "Disassembly of Front Panel Block Assembly".
Step 1 Remove 1 screw.
Step 2 Release 3P Cable from ribs of Front Panel.
Caution: During assembling, dressed the 3P Cable in the
ribs of Front Panel Block Assembly.
Step 3 Lift up the Power Button P.C.B..
Caution: During assembling, ensure that Power Button
P.C.B. is properly located and fully seated onto Front
Panel.
55