Panasonic SA-BT235P Service Manual page 59

10.15.3. Replacement of Pulley Gear & Belt
• Refer to "Disassembly of BD Drive".
• Refer to "Disassembly of Upper Base Assembly".
• Refer to "Disassembly of Tray".
Step 1 Push the Post to the direction of arrow by using the slot-
ted screwdriver.
Step 2 Remove the Pulley Gear and Belt.
10.15.4. Replacement Slide Cam
• Refer to "Disassembly of BD Drive".
• Refer to "Disassembly of Upper Base Assembly".
• Refer to "Disassembly of Tray".
• Refer to "Disassembly of Pulley Gear & Belt".
Step 1 Remove the Sheet.
Step 2 Disconnect the 3 FFCs.
Step 3 Remove the 2 Screws and the Angle.
Step 4 Peel off Coppery Sheet from FFC (A) and remove the
Drive P.C.B..
Caution: Though the Drive P.C.B. is not supplied as
replacement parts, it must be removed for after disassem-
bling.
Step 5 Open the connector lock, and disconnect the FFC.
Step 6 Remove the 2 Screws, and remove the Traverse Base
Ass'y with spreading the 2 hooks to the direction of arrows.
Step 7 Remove the Slide Cam.
59