Dissassembly Of Panel P.c.b - Panasonic SA-BT235P Service Manual

10.8. Dissassembly of Panel P.C.B.

• Refer to "Disassembly of Front Panel Block Assembly".
Step 1 Remove 5 screws.
Step 2 Release 1 catch.
Step 3 Lift up the Panel P.C.B..
Step 4 Desolder the 4P cable at the connector (CN6001) on
Panel P.C.B..
Step 5 Remove Panel P.C.B..
• Assembly of Panel P.C.B
Step 1 Solder the 4P cable to the connector (CN6001) on
Panel P.C.B..
Step 2 Place the Panel P.C.B. onto the Front Panel.
Step 3 Dress 22P FFC according to diagram shown.
Caution: Ensure that it is properly located & fully catched.
47