Caution: During assembling, ensure that catches of Top
Cabinet is insert into Front Panel properly.
Caution: Replace Top Cabinet insulator sheet if broken &
ensure it is pasted properly at Top Cabinet.
10.4. Disassembly of AC Inlet P.C.B.
• Refer to "Disassembly of Top Cabinet".
Step 1 Remove 1 screw.
Step 2 Twist the Wire Holder.
Step 3 Release Red(TL10) & Black(TL20) wires from the Wire
Holder.
Caution: During assembling, ensure that Red (TL10) &
Black(TL20) wires are dressed into Wire Holder.
Step 4 Lift up the AC Inlet P.C.B.from the rear panel.
Step 5 Desolder Red (TL10) & Black (TL20) wires on AC Inlet
P.C.B..
Step 6 Remove AC Inlet P.C.B..
44