Panasonic SA-BT235P Service Manual page 58

10.15.1. Replacement of Upper Base Ass'y
• Refer to "Disassembly of BD Drive".
Step 1 Remove the 4 screws, and push the Hook in.
Step 2 Lift up the Upper Base Ass'y, and pull it out to the direc-
tion of arrow.
10.15.2. Replacement of Tray
• Refer to "Disassembly of BD Drive".
• Refer to "Disassembly of Upper Base Assembly".
Step 1 Insert the Eject Pin into the hole of the bottom side, and
slide it to the direction of arrow until it can be.
Step 2 Pull the Tray to the direction of arrow until it can be.
Step 3 Insert the Eject Pin into the hole of the Tray at 45
degrees, and lean it to the direction of arrow with pushing the
dotted point of the tray forward.
Then the one side of the tray is come off from the Drive.
Step 4 Insert the Eject Pin into the Tray as below figure, lift up
the lever using the Eject Pin while pushing the dotted point of
the Tray.
And remove the Tray.
58