Step 7 Remove 2 screws.
Step 8 Remove the D-Amp P.C.B..
Caution: During assembling, ensure that the D-Amp P.C.B.
is properly located & seated onto the Bottom Chassis.
12.13. Disassembly of AC Inlet P.C.B.
and SMPS P.C.B.
• Refer to "Disassembly of Top Cabinet".
Step 1 Remove 1 screw.
Step 2 Remove 2 screws.
Step 3 Lift up to remove the AC Inlet P.C.B..
57