Installation; Attaching The Stand; For Desktop Use; For Wall Mounting - Fortinet FON-670i User Manual

Installation

Attaching the stand

For desktop use

1. Line the 4 posts on the top of the base up with the 4 holes on the back of the phone.
2. Slide up into place until secure.

For wall mounting

1. Remove center screw from the base and separate the two parts.
2. Attach top part of base to the phone.
3. Mark and drill tthree 5/16" (7 mm) holes.
4. Insert plastic wall anchors (not included) into the holes. Insert and tighten three screws
(not included), leaving about 1/8" (2.5 mm) exposed.
5. Slide the phone over the screws and ensure the phone is secure. It may be necessary to
remove the phone and tighten or loosen the screws for secure mounting.

Connecting the phone

1. Connect the handset cord to the handset and the
2. Optionally connect an amplified headset to the
Installation
jack on the phone.
jack.
Page 4 FortiFone User Guide