Pppoe Interface; Qos; Port - Fortinet FON-670i User Manual

PPPoE interface

Select the PPPoE interface in order to assign the following:
• User — enter your assigned PPPoE username.
• Password — enter your assigned PPPoE password.
• Auto connect on power up — select if you would like to automatically connect PPPoE upon
power up.
• Auto reconnect — if the PPPoE connection fails, select this to automatically attempt to
reconnect.

QoS

The QoS section allows you to set the priority of audio, video and signal to the phone on your
network. QoS settings for the phone include:
• Enable DSCP
• Enable LLDP
• Enable Learning Function
• Packet Interval
• Audio RTP DSCP
• Video RTP DSCP
• SIP DSCP
• Enable WAN port VLAN
• WAN port VLAN ID — range is 0–4095
• 802.1P priority — range is 0–7
• LAN Port VLAN Mode
• LAN Port VLAN ID

Port

The Port section allows you to set the RTP ports through the following settings:
• RTP port range start — you can set a start point for the RTP port between 10000–60000.
The default is 10000.
• RTP port range quantity — you can set the maximum number of RTP ports to be allocated
by the phone from 100–400. The default is 200.
Settings Overview Page 8 FortiFone User Guide