Dnd; Dial Plan - Fortinet FON-670i User Manual

• Default Ans Mode — choose between Audio or Video as the default answer mode when
receiving a call.
• Accept video mode — select how video calls are handled:
— Manually accept video calls
— Auto accept video calls
— Auto reject video calls
• Enable Record — enable this to allow the recording of calls from the phone.
• Use SIP Numbering plan — enable this to register a SIP number with letters and characters.
• Configure Emergency Number — you can configure numbers here that can be dialed even if
the screen is locked.
• Enable 3rd IM App — enables the option to make calls from a third instant messaging app.
• Offhook to open app — when taking the handset offhook the selected third IM App will open.
• IM App — select the third IM App you would like to open automatically if the headset or
speaker phone keys are pressed.
• Supported 3rd IM Set — select apps that you would like to be available for the IM App
selection list.

DND

The DND settings are global; each account will use these settings if the phone is put into DND
mode.
• DND (Do Not Disturb) Mode — contains three options:
— Off — the phone will accept all calls.
— Phone — the phone will reject incoming calls using SIP messaging to send a BUSY
— Line — the phone will reject incoming calls to the Line (Account) selected.
• Enable DND Timer — the phone will disable DND mode after the DND Timer has expired.
• DND Timer — select the amount of time for the phone to be in DND mode.
• Enable white list number in DND — allows numbers in the white list to call the phone when in
DND mode.

Dial plan

The Dial plan settings are global; each account will use these settings for operation of the
phone.
• Enable E.164 — when enabled, the phone will dial numbers according to E.164 rules.
• Press # to Send — when enabled, tapping the
dialed.
• Send after(3-30) — when enabled, you can set how long the phone will wait to automatically
send the number after the last digit has been dialed.
• Press # to Do Blind Transfer — when enabled, pressing
to will complete the blind transfer.
• Blind Transfer on Onhook — when enabled, perform a blind transfer by dialing the number to
transfer to and hang up the handset.
• Attended Transfer on Onhook — when enabled, complete an attended transfer by hanging
up the handset.
Settings Overview
message.
?
key will send a number that has been
?
Page 13
after dialing a number to transfer
FortiFone User Guide