Volume; Tone Profile; Time & Date; Maintain - Fortinet FON-670i User Manual

Volume

The Volume section gives you control over the volume levels heard on the phone.
• Ringtone & notifications — set the volume level heard for incoming calls and notifications.
• Voice volume — set the volume level heard when on a call.
• Alarm volume — set the volume level of alarms.
• Media volume — set the playback volume of various media.
• Enable silent mode — enable this to lower the ringtone & notification volume to 0.

Tone profile

The Tone profile is used to select the base tones of your region such as the dial tone, ring tone,
etc. Simply choose your region from the pulldown menu to set these tones.
Time & date
This section is used to set up the time and date display of the phone.
• Enable SNTP — enable/disable the use of a SNTP server
• Primary Server — enter the IP address or FQDN of the SNTP server you would like to use.
• Timezone — select the timezone of your region.
• Time format — select whether to use a 12 hour clock or 24 hour clock.
• Date Separator — select the separator to use between date sections.
• Date format — select how you would like to display the date.
• Manual Time Settings — manually set the date and the time.

Maintain

The Maintain section is where general maintenance of the phone can be performed, such as
upgrades to the configuration file, upgrading the firmware and setting up Telnet communication.

Upgrade

The Upgrade section is used for obtaining configuration files for the phone.
• Enable PnP — enable/disable the PnP functionality.
• PnP server — enter the PnP server address.
• PnP port — enter the port for the PnP server.
• PnP transport — select the transport protocol to use: UDP or TCP.
• PnP interval (h) — adjust the PnP interval in hourly lengths.
• DHCP option setting — select your DHCP option setting:
— DHCP option disabled
— DHCP option 43
— DHCP option 66
— DHCP option custom
• Custom DHCP option — create your own DHCP option. You must select DHCP option
custom from the DHCP option setting dropdown in order to edit this field.
• Server address — enter the address of the server that is hosting the configuration files.
Settings Overview Page 16 FortiFone User Guide