Softkey; Mcast; Reboot - Fortinet FON-670i User Manual

Softkey

The Softkey section is where you can choose which softkeys are available on specific screens.
For example, below is the Call Dialer screen. On the left-hand side you can see 5 softkeys. This
particular screen can display up to 6 softkeys but many more can be programmed. To access
the additional softkeys beyond what is displayed, hold your finger on the menu and move up or
down on the screen.
To select softkeys that you would like to use, first select the screen you would like to edit from
the SoftkeyScreen dropdown menu. Next, you will have UnSelected Softkeys that are available
to choose from and Selected Softkeys, which are already visible on that particular screen. To
move a softkey between the two sections, tap on the softkey you would like to move and then
tap the arrow key between the two sections. You can also re-order the softkeys in the Selected
Softkey section by tapping the softkey you would like to move and then tap on the up or down
arrows.

MCAST

This section gives you the parameters needed to set up the MCAST, Multicast, address feature
supported by the phone. This phone can support up to 10 multicast addresses.
• Normal Call Priority — set the priority of the active call, 1 is the highest priority and 10 is
the lowest.
• Enable Page Priority — if enabled, a multicast page shall take precedence over the call in
progress.
• Name — enter the multicast server name.
• Host:port — enter the multicast server IP address and multicast port.

Reboot

Tapping on the Reboot button will manually reboot the phone.
Settings Overview Page 21 FortiFone User Guide