ABB M22001 series Manual page 6

ABB-Welcome
No. Function
1 Handset
When a call is coming, pick up the handset to activate communication
within 30 seconds and hang up the handset to end the call.
2 Unlock button
2A Press this button to open the door at any time.
2B auto-unlock: the door is automatically opened for an incoming call
same operation will switch off the function and the blue LED will turn off).
3 Programmable button
3A *Programmable for additional functions, e.g. call guard unit, intercom.....
3B Default function of button 1 is the release of the lock connected with an
4 Three-level selector for call volume adjustment (maximum/ medium /
mute).
5 LED (Red)
- indicating that the
6 LED (Blue)
- indicating that the
7 **Induction loop function
*For their use, please contact your electrical installer.
Pos : 22 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Steuermodul e - Onli ne-D okumentation (--> F ür all e D okumente <--)/++++++++++++ Seitenumbruc h ++++++++++++ @ 9\mod_1268898668093_0.doc x @ 52149 @ @ 1
**This function is only available in M22003-.
|
(hold this button for over 10 seconds until the blue LED turns on; the
outdoor station (COM-NC-NO).
door is open over the
set time (The sensor
must be connected)
system is busy.
- when any button is
pressed.
- indicating an
Incoming call.
Operations
- indicating mute.
- indicating auto-
unlock.
— 6 —