Page 1
VER:1.0 │ │ 22.04.2015 ABB-Welcome Pos : 2 /Di nA4 - Anleitung en Online/Inhalt/KN X/D oorEntr y/83220- AP- xxx/Titelbl att - 83220-AP- xxx - ABB @ 19\mod_1323249806476_15.doc x @ 111084 @ @ 1 M2233.-. 7" Video hands-free indoor station === Ende der Liste für T extmar ke Cover ===...
The device contains valuable raw materials which can be recycled. Therefore, dispose of the device at the appropriate collecting depot. Pos : 12 /DinA4 - Anl eitungen Onli ne/Ueberschriften/2./ABB Geraete @ 19\mod_1323162843832_15.doc x @ 110875 @ 2 @ 1 — 4 —...
ABB devices Pos : 13 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/U mwel t (--> Für alle D okumente <--)/Hinweis e/Hi nweis - U mwelt - ABB El ektr ogeräte @ 19\mod_1323162745839_15.doc x @ 110867 @ @ 1 All packaging materials and devices from ABB bear the markings and test seal s for proper disposal.
Page 7
ABB-Welcome Operation Functions 7"Touch screen Comunication button 2A While a call is coming, press this button to activate the communication within 30 seconds and press it again to end the call. 2B In standby mode, press this button to set up the voice and video connections to the default outdoor station.
ABB-Welcome Operation 4.1.2 Welcome screen and status bar Fig. 2 Status bar During the calling period, the following functions are available: Functions Current date - Touch this button to set the current date.. Time - Touch this button to set the correct time .
Page 9
ABB-Welcome Operation current software information. History - New information is available in History (events and picture memory) when this icon flashes. it means a missed call or a voice message. - Touch this button to display the events and picture memory .
ABB-Welcome Operation 4.2.6 Opening the door Pos : 31 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/T uer oeffnen - 83220- AP- xxx @ 20\mod_1323267958479_15.doc x @ 112109 @ @ 1 Fig. 8 Opening the door Press the key button to activate the door opener. Then, the following function becomes...
Page 19
ABB-Welcome Operation Fig. 10 Activating custom function The program button can be configured with different functions, e.g. call to guard unit, intercom call or control switch actuator. And its default function is the release of the 2nd-lock, which is connected with terminals COM-NC-NO of an outdoor station.
Page 22
ABB-Welcome Operation Fig. 12 Events and picture storage / history — 22 —...
Page 23
ABB-Welcome Operation During a call, you can take a snapshot at any time by pressing the "History" button, events and even when the "Automatic snapshots" function is not activated. The pictures memory / history menu has the following functions. Functions If you have activated the system setting menu "Automatic snapshots", a...
ABB-Welcome Operation 4.2.12 Settings Pos : 31 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/T uer oeffnen - 83220- AP- xxx @ 20\mod_1323267958479_15.doc x @ 112109 @ @ 1 4.2.12.1 Overview Fig. 15 Overview Touch the “Settings” button, to make the following areas available:...
Page 27
ABB-Welcome Operation - Create voice messages for family members or set as an absence message to notify possible visitors. Set Door Open Password - Set the customized door open password, which is available together with a keypad of an outdoor station.
Page 28
ABB-Welcome Operation Fig. 16 Overview of settings To turn to the setting areas of the list field (1), carry out the following steps: Function To display the hidden functions, click on the scroll buttons (2). Touch one of the setting areas.
ABB-Welcome Operation 4.2.12.2 Intercom Fig. 17 Intercom The “Intercom” menu has the following functions. Functions The name of an intercom. The address of an intercom. The type of an intercom. means an external intercom from different apartments. To make an external intercom, each apartment must have a master indoor station.
Page 30
ABB-Welcome Operation Back - Click on this button, so you can return to the system settings menu. Adjust - Click on this button to edit the existing intercom. Pressing “Add” or “Adjust” — 30 —...
Page 32
ABB-Welcome Operation The “Intercom” has the following functions: Functions - Click on the name box so you can edit the name. - Change the call type through the fold-down menu. *External intercom” means a call from different apartments *Internal intercom” means a call from the same apartment - Edit the address via the numeric keyboard, from 001 to 250.
ABB-Welcome Operation 4.2.12.3 Switch Actuator Fig. 19 Switch Actuator The “Switch Actuator“ has the following functions: Functions Name of an actuator. Address of an actuator. - By touching the button you can add new actuator entry. Delete - By tipping the button to delete an existing actuator. Finally confirm the dialogue box displayed.
Page 34
ABB-Welcome Operation Pressing “Add” or “Adjust” Fig. 20 Switch Actuator The “Intercom” menu has the following functions: Functions Click on this edit box to rename the relay actuator. Edit the address via the numeric keypad, from 001 to 199. Click on the “OK” button to activate the settings.
ABB-Welcome Operation 4.2.12.4 Program button Fig. 21 Program button The “Program button“ menu has the following functions: Functions Set the functions for the program button, e.g. release the 2nd-lock, call to the guard unit, intercom call, enabling the switch actuator.
ABB-Welcome Operation 4.2.12.5 Leave Home Management Fig. 22 Leave Home Management Information about the settings User can only choose “Call forward” or “Message leaving”. Two functions can’t be activated at the same time! A warning will be given once “call transfer” or “Message Leaving” is activated.
Page 37
ABB-Welcome Operation Message Leaving - Tick the checkbox to activate or deactivate the call forward. If the messages leaving function is activated, the auto unlock function will be disabled. * Absence message must be set first . If no absence message is set,...
ABB-Welcome Operation 4.2.12.6 Voice Message Fig. 23 Voice Message In totally, 30 voice messages can be recorded. The “Voice Message” menu has the following functions: Functions Direction - Local messages: Message can be heard locally - Absence message: the message can be played for visitors when the “message leaving”...
Page 39
ABB-Welcome Operation - Click on this button to delete an existing voice message. Finally, confirm the dialogue box displayed. Back - Touch the button to return to the system settings menu.. Listen -Touch the button to play the voice message.
ABB-Welcome Operation 4.2.12.7 Setting Door Open Password Fig. 26 Setting Door Open Password The “Set Door Open Password” menu has the following functions (The function only can be set in master indoor station): Functions Tick the checkbox to activate or deactivate the password function.
ABB-Welcome Operation 4.2.12.8 Black list Fig. 27 Black list The “Black List” menu has the following functions (The function only can be set in master indoor station): Functions - The order of a list. Indoor Station Address - Set the address of the target indoor station, from 001 to 250.
Page 43
ABB-Welcome Operation - Touch this button to return to the system settings menu. — 43 —...
ABB-Welcome Operation 4.2.12.9 Audio Settings Fig. 28 Audio Settings The “Black List” has the following functions: Functions Bell sound for the default door - Select a bell sound for the default door by clicking on one of the buttons in the list field.
Page 45
ABB-Welcome Operation apartments. Bell-sound volume - Set the volume of the bell sound with the “Plus / minus” buttons. Mute timer - Use the " Plus / minus " buttons to set the time of the mute function which you activate with the "mute" button.
ABB-Welcome Operation 4.2.12.10 Auto Unlock Fig. 29 Auto Unlock The “Black List” menu has the following functions (The function only can be set in master indoor station): Functions Enable Auto Door Unlock - Tick the checkbox to activate or deactivate the auto unlock.
Page 47
ABB-Welcome Operation with a frame. End Time - Set the end time with the “Plus / minus” button when you activate the timer. - Before adjusting the “Hours” or “Minutes”,. the active range is highlighted with a frame. Repeat - Set the repeat frequency with the fold-down menu when you activate the timer.
ABB-Welcome Operation 4.2.12.11 Display Settings Fig. 30 Display Settings The "Display Settings" menu has the following functions: Functions Brightness - Set the brightness of the display with the "Plus / minus" buttons. Enable screensaver - By tick the checkbox to activate or deactivate the screen saver.
Page 49
ABB-Welcome Operation - The pictures must be stored in the SD card in the directory "DCIM" (Digital Camera Images) on the first level. - The maximum admissible size of a picture is 2048 x 1960 pixels. - The maximum admissible resolution of a picture is 800 x 480 pixels.
ABB-Welcome Operation 4.2.12.12 Date and Time Fig. 31 Date and Time The "Display Settings" menu has the following functions: Functions Time - Select the format of the displayed time via the fold-down menu. - Available are 12 h am/pm / 24 h.
Page 51
ABB-Welcome Operation Date - Set the date via with "Plus / minus" buttons. - Before adjusting the "Day", "Month" or "Year". The active area is highlighted with a frame. Time - Set the time with the "Plus / minus" buttons.
ABB-Welcome Operation 4.2.12.13 Language Fig. 32 Language The "Language" menu has the following functions: Functions Language (list field) - Here the languages available are listed Scroll - To display the hidden languages, tick the scroll boxes. Tick this button to activate the settings.
ABB-Welcome Operation 4.2.12.14 Setup Fig. 33 Setup The "Set-up"menu has the following functions: Function Automatic Snapshots - When the bell is pressed, three snapshots are automatically taken and stored in the History. - This function can only be activated when the automatic door opener is deactivated.
Page 54
ABB-Welcome Operation Indoor Station Address - This option is enabled only when the last two rotary switches of IS are set as “00”, and it can be set from 001 to 250. - By tipping on this button you activate the settings.
ABB-Welcome Operation 4.2.12.15 Firmware Update If the firmware for your device is to be updated, carry out the following steps: Get the new version of firmware from your electrical installer, and copy it into a SD - card. Insert the SD-card into the card slot on your indoor station.
ABB-Welcome Operation Cleaning Pos : 68 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/Rei nigung/Rei nigung Touc hscreenmonitor @ 19\mod_1310734108978_15.doc x @ 107862 @ @ 1 Caution Risk of damage to the screen surface. The screen surface can be damaged by hard or sharp objects! Never use such objects for entries on the touch screen monitor.
ABB-Welcome Operation 4.4.2 Connection Fig. 35: Functions Connection for the door bell push-button • Connection for the system controller • When using several indoor stations: connection for the internal bus Pos : 75 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Steuermodul e - Onli ne-D okumentation (--> F ür all e D okumente <--)/++++++++++++ Seitenumbruc h ++++++++++++ @ 9\mod_1268898668093_0.doc x @ 52149 @ @ 1...
ABB-Welcome Mounting / Installation • Use suitable personal protective clothing. • Use only suitable tools and measuring devices. • Check the type supply network (TN system, IT system, TT system) to secure the following power supply conditions (classic connection to ground, protective earthing, necessary additional measure s, etc.).
ABB-Welcome Mounting / Installation Pos : 84 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Übersc hriften (--> Für alle D okumente <--)/2. Ebene/M - O/Montage @ 18\mod_1302615960458_15.doc x @ 103424 @ 2 @ 1 Mounting Pos : 85.1 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/DoorEntr y/83220-AP- xxx/M ontag e - M odul e/Montage - Montagedose -- 83220-AP- xxx @ 19\mod_1323250406848_15.doc x @ 111098 @ @ 1 Dismantling Open the housing of the panel by pulling the clamp at the bottom of the device.
Page 64
ABB-Welcome Mounting / Installation Wiring Connect the bottom part of the device according to the graphics (see chapter "Connection"). Setting Set the address of the preferred outdoor stations and the address of the indoor station on the rotary switches. Set the master/slave function and the terminal resistor on the switches at the rear of the Terminal Resistor top part of the housing (see chapter "...
Page 65
ABB-Welcome Mounting / Installation Latch the device Latch the upper part of the device onto its bottom part : place the upper side of the device on the lock-in lugs and then press the bottom side onto the bottom part of the device until it is caught by the clamp.
Page 66
ABB-Welcome Mounting / Installation Pos : 94 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Steuermodul e - Onli ne-D okumentation (--> F ür all e D okumente <--)/++++++++++++ Seitenumbruc h ++++++++++++ @ 9\mod_1268898668093_0.doc x @ 52149 @ @ 1...
Page 67
We reserve the right to at all times make technical changes as well as changes to the contents of this document without prior notice. The detailed specifications agreed to at the time of ordering apply to all orders. ABB accepts no responsibility for possible errors or incompleteness in this document.