Serial Ata Connectors - DFI LANPARTY UT X58 t3eh8 User Manual

E
English
3. The length of the audio cable pro-
vides the option and flexibility of in-
stalling the module on any available
expansion bracket slot at the rear of
the system chassis. Remove the screw
of the bracket where you want the
audio module installed then remove
the bracket. Place the Bernstein audio
module on the expansion bracket slot
then secure the module by replacing
the bracket screw you removed earlier.
I/O Connectors

Serial ATA Connectors

The Serial ATA (SATA) connectors are used to connect Serial ATA
drives. Connect one end of the Serial ATA cable to a Serial ATA
connector and the other end to your Serial ATA device.
ICH10R supports SATA 1 to SATA 6.
JMB363 supports SATA 7 and SATA 8.
Configuring RAID
Refer to the RAID chapter in this manual for more information
about creating RAID on Serial ATA drives.
22
SATA 7-8
Intel
1
1
SATA 1-2
1 ICH9R
SATA 3-4
SATA 5-6
Audio cable