Serial Ata Connectors - DFI LANPARTY LT X38 series User Manual

E
English
3. The length of the audio cable
provides the option and flexibil-
ity of installing the module on
any available expansion bracket
slot at the rear of the system
chassis. Remove the screw of
the bracket where you want the
audio module installed then re-
move the bracket. Place the
Bernstein audio module on the
expansion bracket slot then secure the module by replacing the
bracket screw you removed earlier.
I/O Connectors

Serial ATA Connectors

The Serial ATA (SATA) connectors are used to connect Serial ATA
drives. Connect one end of the Serial ATA cable to a Serial ATA
connector and the other end to your Serial ATA device.
ICH9R supports SATA 1 to SATA 6.
JMB363 supports SATA 7 and SATA 8.
Configuring RAID
Refer to the RAID chapter in this manual for more information
about creating RAID on Serial ATA drives.
22
Audio cable
SATA 7-8
SATA 1-2
SATA 3-4
SATA 5-6