Cooling Fan Connectors - DFI LANPARTY LT X38 series User Manual

Cooling Fan Connectors

N. C.
3
Power
Ground
1
NB fan
Power
Ground
N. C.
1 3
3rd fan
Power
Ground
N. C.
1 3
2nd fan
These fan connectors are used to connect cooling fans. Cooling fans
will provide adequate airflow throughout the chassis to prevent over-
heating the CPU and system board components.
EZ Touch Switches
The presence of the power switch and reset switch on the system
board are user-friendly especially to DIY users. They provide conven-
ience in powering on and/or resetting the system while fine tuning
the system board before it is installed into the system chassis.
English
1
Ground
Power
Sense
Speed
4
Control
CPU fan
Power
Ground
N. C.
1 3
1st fan
Power
Ground
N. C.
1 3
System fan
Reset Power
E
25