About The Package; Before Using The System Board - DFI LANPARTY LT X38 series User Manual

1
Introduction

About the Package

The system board package contains the following items. If any of
these items are missing or damaged, please contact your dealer or
sales representative for assistance.
The system board and accessories in the package may not come
similar to the information listed above. This may differ in accordance
to the sales region or models in which it was sold. For more infor-
mation about the standard package in your region, please contact
your dealer or sales representative.

Before Using the System Board

Before using the system board, prepare basic system components.
If you are installing the system board in a new system, you will need
at least the following internal components.
•
•
•
You will also need external system peripherals you intend to use
which will normally include at least a keyboard, a mouse and a video
display monitor.
6
One system board
One Bernstein audio module with cable
One Transpiper kit (LP UT X38-T2R/T3R only)
- One Transpiper
o
- One 90 metal pipe
- One thermal paste
One copper plate with mounting screws (LP UT X38-T2R/T3R only)
One Northbridge heat sink cooling kit (LP LT X38-T2R/T3R only)
One IDE round cable
One floppy round cable
Four Serial ATA data cables
Four Serial ATA power cables
One I/O shield
One RAID driver diskette
One "Mainboard Utility" CD
One user's manual
A CPU
Memory module
Storage devices such as hard disk drive, CD-ROM, etc.