DFI LANPARTY LT X38 series User Manual page 12

E
English
Clearing CMOS Data using the EZ Clear
EZ Clear
the CMOS by simply using the reset and power buttons.
To use EZ Clear
1. Make sure the standby power is present.
2. Using the EZ touch switches on the system board, first press the
Reset button then the Power button simultaneously for approxi-
mately 4 seconds.
If the system board is already enclosed in a chassis, apply the
same method using the Reset button and Power button located
at the front panel of the chassis.
3. After 4 seconds, release the power button first then the Reset
button.
4. The CMOS will restore the clock settings back to their default
values.
12
®
bypasses the manual process of using a jumper to clear
Important:
®
EZ Clear is supported only if standby power is present in the
system.
®
:
®
Function
Reset Power