Kranzle 2170TST Operating Manual page 5

Table of Contents

Notes

Description

With delayed motor cut-out

Frequent, work-necessitated switching on and off of motors on

machines of this size puts a heavy load on the power network

and causes increased wear on internal electrical parts. That's

why the motor on the new KRÄNZLE switches itself off 30

seconds after the trigger is released, and switches itself back on again when the

trigger is pressed.

Safety cut-out

If you forget to switch the machine off after use, or if the gun is not used for 20

minutes, the machine switches automatically to safety mode. It can be re-activated

by pressing the master switch.

Replacements and inspection work should only be performed by

qualified persons when the machine is disconnected from

the power supply, i.e. pull out the plug from the

electrical socket.

Setting up

Location

Neither set up and operate the machine in rooms where there is a risk of fire or

explosion nor put it into puddles. Do not use the machine under water.

CAUTION !

Never use liquid containing solvents such as paint thinners, petrol, oil or similar

liquid matter. Pay attention to the instructions of the manufactur-

ers of the cleaning agents. The seals in the machine are not resistant to

solvents. The spray of solvents is inflammable, explosive and poisonous.

CAUTION !

When running your high pressure cleaner with hot water of 80° C raised tem-

peratures occur. Do not touch the machine without safety gloves!

Table of Contents