Troubleshooting - Kruger&Matz KM1584CD Owner's Manual

TROUBLeSHOOTING

If you are having a problem with your system, check this list for a possible solution before calling
for service.
If you can not solve the problem from the hints give here, or the system has been physically
damaged, call a qualified person, such as your dealer, for service.
No power
• Ensure that the AC power plug of the unit
is connected properly.
• Ensure that there is power at the AC outlet.
• To save power, the unit switches to
standby automatically 15 minutes after
a play reaches the end and no control is
operated.
USB device not supported
The USB device is incompatible with the unit.
Try another one.
No sound
Adjust the volume.
No disc detected
• Insert a disc.
• Check if the disc is inserted with the print
side facing inward.
• Wait until the moisture condensation at
the lens has cleared.
• Replace or clean the disc.
• Use a finalized DVD or correct format disc.
Cannot display some file in USB device
• The number of folders or files in the USB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
• The formats of these files are not supported.
Remote control does not work
• Before pressing any function button, first
select the correct source with the remote
control instead of the main unit.
• Reduce the distance between the remote
control and the unit.
• Insert the battery with its polarities (+/-
signs) aligned as indicated.
• Replace the battery.
• Aim the remote control directly at the
sensor on the front of the unit.
38
Clock timer setting erased
• Power has been interrupted or the power
cord has been disconnected.
• Reset the clock/timer.
Timer does not work
• Set the clock correctly.
• Switch on the timer.
Poor radio reception
• Increase the distance between the unit
and your TV or VCR.
• Fully extend and adjust the FM antenna.
Music playback is unavailable on
the system even after successful
Bluetooth connection
The device cannot be used with the system to
play music.
The audio quality is poor after connection
with a Bluetooth-enabled device
The Bluetooth reception is poor. Move the
device closer to the system or remove any
obstacle between the device and the system.
Cannot connect with the system
• The device does not support the profiles
required for the system.
• The Bluetooth function of the device is not
enabled. Refer to the user manual of the
device for how to enable the function.
• The system is not in the pairing mode.
• The system is already connected with
another Bluetooth-enabled device.
• Disconnect that device or all other
connected devices and then try again.
Owner's manual