Troubleshooting; Poor Radio Reception - Kruger&Matz KM1808 Owner's Manual

TROUBLESHOOTING

If you are having a problem with your system, check this list for a possible solution
before calling for service.
If you can not solve the problem from the hints give here, or the system has been
physically damaged, call a qualified person, such as your dealer, for service.
No power
• Ensure that the Ac adaptor plug of
the unit is connected properly.
• Ensure that there is power at the Ac
outlet.
USB device not supported
The USB device is incompatible with
the unit. Try another one.
Timer does not work
• Set the clock correctly.
• Switch on the timer.
Cannot display some file in USB
device
• The number of folders or files in the
USB device has exceeded a certain
limit. This phenomenon is not a
malfunction.
• The formats of these files are not
supported.
No sound
Adjust the volume.
48
No disc detected
• Insert a disc.
• check if the disc is inserted with the
print side facing inward.
• Wait until the moisture condensation
at the lens has cleared.
• Replace or clean the disc.
• Use a finalized Disc or correct format
disc.

Poor radio reception

• Increase the distance between the
unit and your TV or VcR.
• Fully extend and adjust the FM
antenna.
Remote control does not
work
• Before pressing any function button,
first select the correct source with
the remote control instead of the
main unit.
• Reduce the distance between the
remote control and the unit.
• Insert the battery with its polarities
(+/– signs) aligned as indicated.
• Replace the batteries.
• Aim the remote control directly at
the sensor on the front of the unit.
Owner's manual