HP Designjet 8000s Series Installation Manual page 42

Unpacking and Installation
4 Remove the five blue fixing screws (1) from the Center Platen. Also remove the
Yellow Label from the Center Platen.
5 Remove the fixing tape (1) from the Media Edge Guards (2) and move each
Edge Guard to each end of the printer.
6 Remove the beaded cable tie with the label (1) from the top beam. Also
remove the cushioning strip (2) from under the Pinchwheels (raise the Media
Lever before removing).
7 Close the Front Cover.
4-20
HP Designjet 8000s Series Printer Installation Guide