3
PART NAMES AND FUNCTIONS
Remote controller (PK12/18/24/30/36FK)
Settings remain in effect until changed.
Air conditioner can be operated by simply pushing ON/OFF button once settings have been
made.
Remote controller operation buttons
OPERATION MODE
button
Press this button to switch the cool-
ing,electronic dry (Dehumidify), fan
modes.
SET TEMPERATURE
button
This sets the room temperature.
The temperature setting can be per-
formed in 2˚F units.
Setting range :
Cooling
65˚F to 87˚F
TIMER ON/OFF button
This switches between continuous
operation and the timer operation.
FAN SPEED button
This sets the ventilation fan speed.
•CENTRALLY CONTROLLED•
POWER
ON/OFF
ON
DRY
MODE SELECT
FAN
COOL/DRY
COOL
FAN
SET
CHECK
WARMER
COOLER
SET TEMP
F
TEMPERATURE
TIMER OFF
TIMER
MODE
HOURS
AUTO STOP
HR
AUTO START
FAN SPEED LOW/HIGH
LOW HIGH
AIR
SWING
UP/DOWN
DISCHARGE
F
AUTO RETURN
CHECK
TEST RUN
CHECK TEST RUN
MITSUBISHI ELECTRIC
CHECK-TEST RUN button
Only press this button to perform an
inspection check or test operation.
Do not use it for normal operation.
OC196A-6
ON/OFF button
This switches between the opera-
tion and stop modes each time it is
press. The lamp on this button
lights during operation.
AIR DISCHARGE
button
This adjusts the vertical angle of the
ventilation.
STOP