Mitsubishi PK12FK Instruction Manual page 38

2-4 TIMER operation
CENTRALLY CONTROLLED
POWER
ON
DRY
MODE SELECT F A N
FAN COOL
SET
CHECK
81
TENPERATURE WARMER
SET TEMP
F
TIMER OFF
12
TIMER MODE
AUTO STOP
HR
AUTO START
LOW HIGH FAN SPEED LOW/HIGH
AIR
UP/DOWN
DISCHARGE
88 F
AUTO RETURN
CHECK TEST RUN
CHECK
(PK12/18/24/30/36FK)
SWING
DRY COOL TIMER OFF TIMER CLOCK AUTO AUTO
FAN
FAN CHECK SET TEMP. START STOP
SPEED
MODE TIMER ON/OFF CLOCK/TIMER FAN SPEED AIR DISCHARGE FILTER
SET TEMP. TIMER SET
REMOTE CONTROLLER
PK12/18/24/30/36FK
(
PK18/24/30/36FK
<Timer setting example>
8
AUTO STOP
HR
ON/OFF
COOL/DRY
COOLER
HOURS
SWING
STOP
TEST RUN
F
AUTO
RETURN
AIR SWEEP CHECK
TEST RUN
)
1
2
This setting will stop the air conditioner in 8 hours.
With the lapse of time, time display changes in 1 hour units, showing remaining time.
<Timer function>
AUTO STOP ·········The air conditioner stops after the set time lapses.
AUTO START ········The air conditioner starts after the set time lapses.
AUTO OFF ············Timer is not active.
<How to operate>
1. Press POWER ON/OFF button.
2. Press TIMER HOURS button to select AUTO STOP or AUTO
START.
3. Press TIMER HOURS button to set desired time.
Time setting is in 1 hour units for up to 24 hours.
Each time HOURS button is pressed, set time increases by 1 hour.
When HOURS button is pressed and held, the set time increases
by 1 hour every 0.5 seconds.
4. To cancel the timer operation, press POWER ON / OFF button.
OC196A-38