Mitsubishi PK12FK Instruction Manual page 58

OPERATING PROCEDURE
8. Removing the line flow fan and the fan motor
(1) Remove the left and right side panels.
(2) Remove the grilles.
(3) Remove the electrical box.
(4) Remove the drain pan.
(5) Loosen the screw that fixes the line flow fan to the fan
motor. (See Photo 7. )
(6) Remove the 4 screws of the motor fixture, and remove the
fan motor and the motor fixture at a time (See Photo 8.)
(7) Remove the screws of the left and right motor supports,
and remove the motor supports and the fan motor. (See
Photo 9.)
(8) Remove the 2 screws on the left and right sides of the heat
exchanger, and pull the bearing support toward you. (See
Photo 11.)
(9) Remove the screw of the center support, and remove the
support. (See Photo 10. )
(10) Pull the left-hand side of the heat exchanger toward you,
and remove the line flow fan.
Photo 11
Heat exchanger
Bearing support
Line flow fan
Photo 7
Photo 8
Photo 9
Screw
Motor support
Photo 10
Center support
OC196A-58
PHOTOS
Screw
Line flow fan
Fan motor
Screws
Fan motor
Motor fixture
Fan motor
Line flow fan
Screw
Screw
Motor
support