One-Touch Broadcast (Otb) - VTech 15750 User Manual

Notes:
• If you want to cancel an intercom call and reconnect
to the outside call before the destination handset
answers, press OFF/CLEAR
handset. .
• If the called device is not answered within 100
seconds, or accessing the phonebook or call log, or
is on a call, or is out of range, the initiating device
shows No answer. Try again.

ONE-TOUCH bROADCAsT (OTb)

You can directly broadcast messages to the
speakerphone of any handset. Press and hold OTB on a
handset begin two-way communication.
• Only one device can talk at a time. While talking to
another handset, press and hold OTB on the handset.
You must release OTB on the handset, so the other
•
person can respond.
Only one OTB session can be active at a time.
•
While OTB is in use between two handsets, other
•
handsets cannot use the intercom feature but can
access the answering system.
• When you attempt to place a broadcast call to
another device which is accessing the answering
system or on an intercom call or outside call, your
device screen shows Not available at this time.
Note: The OTB function is not available when QUIET
mode is on.
CLEAR on the originating
119