Step 3: Specify Wireless Settings - HP PS110 Configuration And Administration Manual

Step 3: Specify wireless settings

The PS1 10 router supports a dual-band single radio for 2.4 GHz or 5 GHz operation. This
means that the PS1 10 can operate at 2.4 GHz or 5 GHz, but not both at the same time. By
default, the radio is enabled on the 2.4 GHz band.
Configure the following basic wireless settings before clicking Next.
Radio Band and Radio Mode
Configure the PS1 10 router to operate in the 2.4 GHz band (for 802.1 1b/g/n) or the 5 GHz
band (for 802.1 1a/n), and then select an operating mode. The 1 1b/g/n Mixed mode is
configured by default. For more information, see "Basic wireless settings" on page 50.
Wizard Setup 15