Step 4: Summary - HP PS110 Configuration And Administration Manual

SSID
A default wireless community (SSID) is defined on the PS1 10, its name is HP1 and it is
assigned to VLAN 1. The settings that initially display in the wizard pertain to the default
wireless community. Enter a unique SSID name for your network. For more information, see
"Basic wireless settings" on page
Note
The PS1 10 allows you to create up to four wireless communities.
MAC Authentication, Authentication Mode, and Encryption Type
Configure wireless security for the default wireless community. The PS1 10 has no wireless
security configured by default. HP recommends that WPA2 be configured for maximum
security. Leaving the Authentication Mode setting as Open or using WEP security is not
recommended.
For more information on wireless security, see

Step 4: Summary

After you complete the Wizard Setup, the Summary page displays.
Confirm the settings, and then click Finish. The router reboots and the PS1 10 is operational.
16 Using the Wizard Setup
50.
"Configuring wireless security" on page 53.