Ping - HP PS110 Configuration And Administration Manual

Ping

Ping is a network tool that sends ICMP ECHO_REQUEST datagrams to a remote host and elicits
an ICMP ECHO_RESPONSE datagrams from the remote host. Enter the IPv4 or IPv6 address,
or enter the domain name of the host, select the number of pings to send, and then click Start.
This page includes the following settings:
IP Address/Domain Name
You can specify an IPv4 address, an IPv6 address, or a hostname.
Ping Count
Specify the number of pings to send (1, 3, 5, 10, or 20).
Results
The results window shows the size and number of each packet sent and, if the host is reached,
the size and number of each packet received in response and its round-trip time. It also displays
statistics about packet loss and, if the host is reached, the average round-trip time for all
packets.
120 Tools