Vonets vap11g Step-By-Step Manual page 27

Step 3: Switch on your chosen device.
Step 4: After several seconds, the wifi bridge lights will
start flashing . This means that your wifi bridge is receiving
and transmitting information and is working properly.
Step 5: Wait about 30 seconds for communications be-
tween your wifi bridge and your wireless network to be
normalised.
Step 6: Congratulations!
sen device wireless!
Step
data connection
Insert the RJ45 connec-
tor of the wifi bridge
into the RJ45 socket of
your chosen device.
You have now made your cho-
2: Making the