Connecting Your Wifi Bridge To A Power Source - Vonets vap11g Step-By-Step Manual

Connecting your wifi bridge to
a power source
Once you have configured the device, i.e. You have put
your wireless network's information onto the wifi bridge,
you are ready to connect the wifi bridge to your chosen
device, e.g ., game console, satellite receiver, printer, etc.
Step 1: Powering
the wifi bridge
Plug the usb con-
nector of
bridge into the USB
port of
device.
> If your chosen
device does not have
a USB port, pull off
the USB
and insert the power
connector underneath
into the power socket of your
chosen device.
> If your chosen device
has neither a USB port nor a
power socket, you will need
to use an external 12v power
supply* and insert its power
c o n n e c t o r
(power socket) at the base of
the wifi bridge.
* E x t e r n a l p o w e r s u p p l i e s ar e ch e ap an d can b e p u r ch a s e d f r o m m o s t e le c -
tr i c a l s u p p li e r s , s u c h as t h o s e o n e B ay an d o n th e h i g h s t r e e t, s u ch as Ar g o s
the wifi
the chosen
connector
i n t o t h e h o l e