Page 2
Thanks for choosing Vonets VAP11G WiFi Bridge. With this portable device, VoIP Phone Adapters, IP Phones and other IT products with Ethernet RJ45 port can access wireless network easily. Two kinds of application topology of VAP11G are shown as below.
Page 3
VAP11G User Manual VAP11G provides users a combination of Ethernet network and power cable, VAP11G uses the original power supply of VoIP phone adapter or some other IT products’ power supply which has DC 2.0 power jack (5-15V, 1.5W). One power supply can power VAP11G, as well as the VoIP phone adapter.
Page 4
VAP11G User Manual Please use power supply with the polarity as shown below. Power supply with different polarity will damage VAP11G and the devices which the power supply belongs to. Vonets will NOT be responsible for the loss caused by using the incorrect power supply.
Page 8
VAP11G User Manual 5. Users can see a list of all VAP11G WiFi bridge can be detected by the wizard, select the one you are installing, click Next continue. You can also click Refresh List button to check again.
Page 11
Next to save your new settings. 9. VAP11G will attempt to connect the wireless network with the new settings. Make sure the Bridge’s Wireless LED is solidly lit or flashing. This indicates that the Bridge has connected to the wireless network. If the attempt succeeds, proceed to screen 12.
Page 12
VAP11G User Manual To make sure VAP11G is working, cut off all other internet connection to the PC (only reserve the connection between the PC and VAP11G). If you setup VAP11G successfully, the PC can view internet now. 3. Typical Application for VoIP Phone Adapter 1.
Need help?
Do you have a question about the VAP11G and is the answer not in the manual?
Questions and answers