Configuring The Wifi Bridge - Vonets vap11g Step-By-Step Manual

Configuring the wifi bridge

Connect the wifi bridge to your PC
Make sure that you have followed the instructions so
far and that your wifi bridge is connected to your PC
and that your wifi bridge is receiving power.
Run the configuration program
Configuration - Step 1
The program looks for
•
the wifi bridge
The program will run
•
and a box will appear
on the screen.
> A message appears say-
ing that the program is look-
ing for the wifi bridge.
> When the program has finished looking for the
Locate the VONETS VAP11G
folder in the Start Menu (if
you chose a different folder
name, then locate this folder
in the start menu). Configura-
tion happens in three short
steps.