Download Print this page

Conrad 75 07 81 Operating Instructions Manual page 50

Digital code lock

Advertisement

Warning!
The duress code has two effects: It activates the open collector
and output 1 at the same time, like when you enter the operator
code 1.
The duress code can switch on or off output 1 at any time (start
/stop mode), but it cannot set back the open collector. This pro-
cedures is reserved for operator code 1.
1c4 the short code consists of the first two digits of the operator
code 1 or 2. If the operator codes have been programmed in the
"start / Stop mode with short code", you can control outputs 1 and
2 with the short code. Thus it is possible to activate outputs 1 and 2.
However, if you wish to deactivate them, ie. Switch them off, the
complete operator code "xxxx" (not only two digits) must be
entered.
Example: output 1 has been programmed for the "start / stop
mode with short code" (access code 42), the complete operator
code being 9270 for example. Then the short code would be:
92
#
output 1 starts (on)
9270
output 1 stops (off)
1c5 To check the safety locking, enter several false codes. The sys-
tem considers 4 digits as one code and "answers" with 5x beep for
every false entry. after 10 false entries, the keyboard / the system
will be blocked, i.e. normal operation of the code lock would only be
permitted after the set time. You can release the block any time with
the master code.
3289 # The blocking is released, the system is in normal opera-
tion mode.
50
d) Mémoriser le code clé personnel et le code utilisateur
d1 Un utilisateur
Code d'accès
Entrée du code
0
4 chiffres
1
4 chiffres
2
4 chiffres
d2 Plusieurs utilisateurs
Code d'accès
Numéro de
l'utilisateur
0
4 à 8 chiffres
1
00 à 99
4 à 8 chiffres
2
00 à 99
4 à 8 chiffres
Confirmation
Remarques
#
Code clé personnel
#
Code utilisateur 1
avec fonction Duress
#
Code utilisateur 2
(éventuellement
pour
l'armement/
désarmement
système d'alarme)
Entrée Confirmation Remarques
du code
#
Code clé per-
sonnel
#
100 codes utili-
sateurs dans le
groupe 1 avec
fonction Duress
#
10 codes utilisa-
teurs
dans
groupe 2 (éven-
tuellement pour
l'armement
désarmement
d'un
système
d'alarme)
d'un
le
/
71

Advertisement

Chapters

loading