Download Print this page

Prescribed Use - Conrad 75 07 81 Operating Instructions Manual

Digital code lock

Advertisement

en mode plusieurs utilisateurs, jusqu'à
111.110.000 par code utilisateur
Sorties des relais :
sortie 1 max. 2A / 30 VDC, NC et
contacts NO
sortie 2 max. 1A / 30 VDC, NC et
contacts NO
Code de passage (Duress) : Collecteur « DU OUT « commute sur
masse (-) =terre = GND, max. 100 mA,
max. 12 V Uce
Durée d'une entrée :
10 s pour chaque entrée de chiffre lors
de la programmation
et 30 s pour chaque entrée de code
Dimensions (LxHxP) :
env. 117 x 117 x 21 mm (sans câbles
de raccordement)
Un exemple d'application possible
(schéma de câblage)
sortie (relais) 1
pour la gâche électrique
sortie (relais) 2
pour le système d'alarme
Code de passage (Duress) : pour l'alarme de panique, la gâche
électrique ou un transmetteur télépho-
nique ou similaires
Led jaune/rouge
affichage d'alarme (armé/désarmé
Led verte
porte ouverte, entre autres
Touche Egress
ouvrir la porte
88

Prescribed Use

• The code lock serves as a doorbell, for activation (of doors,
garage gate drives etc.) and for monitoring and access identifica-
tion of entrance doors.
• The code lock may only be used in dry rooms or in protected out-
door areas. The contact with direct humidity must absolutely
avoided.
• The product is only approved for an operation with a 12 Volt
direct or alternating current.
• The maximum switching capacity of the relay 1 must not be oper-
ated with more than 2 Ampere and 30 V direct or alternating cur-
rent. The output duress must not be loaded with more than 100
mA and 12 V direct current, and the 12 Volt output with not more
than 2 Ampere direct current.
• Any use other than the one described above is inadmissible and
will damage the product. Moreover, this involves dangers, such
as e.g. short-circuit, fire, electric shock, etc. No part of the prod-
uct may be modified or rebuilt and the housing must not be
opened! The safety instructions must always be observed!
33

Advertisement

Chapters

loading