Entering The Flap Values - Pfaff 3582-2/01 Instruction Manual

Setting up
9

Entering the flap values

.07
● Switch on the machine.
● Select the basic display by touching the screen.
● Select the menu for entering the flap values by touching the appropriate symbol.
● Enter the required value for the distance of the corner knife from the beginning of the
● Enter the required value for the distance of the corner knife from the end of the seam in
● Enter the required distance to the flap edge for the beginning of the seam in the top field.
● Enter the required distance to the flap edge for the end of the seam in the bottom field.
● After touching the symbol, a menu for entering the flap length appears. The flap length
9 - 7
Basic display for entering flaps
For the fields described below, a number field can be selected by touching the
appropriate field. The appropriate value can then be entered by touch. To
conclude the entry, press Enter.
seam in the top field.
the bottom field.
The flap will be recognized by the sensor.
The flap will be recognized by the sensor.
must be entered on the number field.