Winding The Bobbin Thread / Adjusting The Preliminary Thread Tension - Pfaff 3582-2/01 Instruction Manual

9

Winding the bobbin thread / adjusting the preliminary thread tension

.02
Fig. 9 - 02
● Place empty bobbin 1 on spindle 2.
● Thread up as shown in Fig. 9-02 and wind the thread around bobbin 1 a few times in a
clockwise direction.
● Engage the bobbin winder by pressing lever 3 in the direction shown by the arrow.
● The tension of the thread on bobbin 1 can be set on screw 4.
● The bobbin winder will stop automatically, when there is enough thread on bobbin 1.
Bobbin 1 is filled during sewing.
The adjustment of the amount of thread is described in Chapter 12
Adjustment.
2
4
Setting up
1
3
5
9 - 2